ASCO RedHat Solenoid Valves
ASCO RedHat Solenoid Valves The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. The ASCO RedHat brand offers the worlds largest selection of 2-way, 3-way and 4-way solenoid valves, designed to handle the most demanding fluid control applications.
|ASCO 2-Way Solenoid Valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are “Normally Closed” and “Normally Open”.|
|ASCO 3-Way Solenoid Valves have three pipe connections and two orifices. When one orifice is open, the other is closed and vice versa. 3-way solenoid valves are commonly used to alternately apply pressure to and exhaust pressure from a valve actuator or a single acting cylinder. The RedHat solenoid valve can be normally closed, normally open or universal.|
|ASCO 4-Way Solenoid Valves have four or five pipe connections, commonly called ports. One pressure inlet, two cylinder ports providing pressure to double acting cylinder or actuator, and one or two outlets to exhaust pressure from the cylinders.|
|Condensate Drain Valve Assemblies are designed to automatically drain condensate in compressed air systems. Condensate drain valve assemblies features standard 2-way RedHat solenoid and piloted piston valves, along with an adjustable electronic timer.|
|Direct Mount ASCO Valves are standard 3-way and 4-way RedHat solenoid valves whose NPT pipe connections and mounting configurations have been replaced by NAMUR mounting configuration. This allows each valve to be mounted directly to an actuator without the use of hard piping or tubing.|
|Dust Collector Valves are high-flow fast-opening 2-way RedHat valves, pilot valves, pilot valve enclosures and bulkhead fittings that have been specially designed for use in dust collector systems.|
|Group Mounted Position Valves are 2-way, 3-way and 4-way 2-position valves that are designed for gang mounting into different quantities of valves. Any combination of normally closed, normally open or universal valves may be grouped together.|
|Manual Reset Valves are standard 2-way, 3-way and 4-way 2-position valves that use a manual reset assembly in replacement of the solenoid. They are designed to prevent inadvertent valve startup in their designed failure modes. These series are available in no voltage release, electrically tripped, and free handle constructions as well as latched open or latched closed for 2-way valves.|
|Medical/Analytical ASCO Miniature general service, isolation, pinch, and proportional valves are utilized for the precise and reliable control of liquids and gases in medical equipment and analytical instrumentation.|
|ASCO S Series are developed and engineered with ASCO’s global resources. ASCO S is a compact solution for 2-way, 3-way and steam valve applications and can operate in 15°F to 125°F ambient temperature locations. This solution includes DIN connection for easy wiring, compact brass bodies and encapsulated coils. Options include 15″ leads, alternate elastomers, manual operators, and mounting brackets.|
|Options/Accessories ASCO offers a wide variety of accessories and optional features to meet your specific application requirements.|
2-Way Solenoid Valves
ASCO’s 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted.
With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures from 0 psi to its rated maximum.
Internally piloted constructions use line pressure to assist operation. When the coil is de-energized (on a Normally Closed Valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve.
Learn more about ASCO’s 2-way solenoid valves.
ASCO’s line of 2-way solenoid valves include General Service, Hot Water/ Steam, Potable Water and Food Service, Vacuum, Cryogenic and Liquid C02, Air Operated, Proportional, Intrinsically Safe, Low Power, Isolation/ Shielded Core, Long Life / Quiet, Ammonia, Dry Air, Magnetic Latching and Medical/ Analytical.
Air/Inert Gas, Water, Lt. Oil (up to 300 SSU) service at moderate temperatures.
|8030 Series||Direct Acting Low Pressure/Vacuum – 3/8″-3/4″
Valves available in normally closed and normally open constructions. Available in either AC or DC operated with brass or Stainless Steel bodies.
|8040 Series||High Flow / Low Pressure – 1/8″-3/8″
Direct acting valves available in normally closed constructions only. Available AC operated with light weight aluminum bodies. Ideal for applications that demand high flows at low pressure.
|8210 Series||Air/Inert Gas, Water, Lt. Oil – 3/8″–2 1/2″ –
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with Brass or Stainless Steel bodies for a wide variety of applications. Diaphragm constructions from 3/8″–1 1/2″, piston constructions from 3/8″–2 1/2″. Our most economical, high flow valve available.
|8215 Series||Low Pressure – Air/Inert Gas – 3/8″–3″
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with Aluminum bodies.
|8221 Series||Slow Closing /Anti-Water Hammer – 3/8″-2 1/2″-
Solenoid pilot operated valves available in normally closed and normally open constructions. Available either AC or DC operated with brass bodies. Designed to effectively reduce damage caused by water hammer.
|8223 Series||High Pressure – 1/4″-3/4″ –
Pilot operated solenoid valve available in a normally closed construction. They are a rugged piston construction built to withstand high pressures and are available AC or DC with brass and stainless steel bodies. Ideal for high pressure water applications (up to 1500 PSI).
|8256 Series||Sub-Miniature Poppet – 1/8″
Direct acting, normally closed solenoid valves. Available either AC or DC operated in brass or 316 stainless steel bodies and with or without manual operators. Small poppet valve well suited for a wide variety of Air, Water, Lt. Oil Applications. Recommended for use in place of the 8225 Series valves.
|8260 Series||Plastic Body, Air / Water – 1/4″
Direct acting valve available in a normally closed construction. Available AC or DC operated with plastic bodies designed to handle the challenges of harsh media. Ideal for water dispensing applications.
|8262 Series||Direct Acting Poppet – 1/8″-1/4″
Direct acting solenoid poppet valves are available in normally closed and normally open constructions, AC or DC operated in brass or stainless steel bodies. High flow and a variety of elastomers for a wide range of applications.
|8263 Series||Direct Acting Poppet, – 3/8″
Direct acting solenoid poppet valves are available in normally closed and normally open constructions, AC or DC operated in brass or stainless steel bodies. Field replaceable seat/orifice design for flexibility.
|8280 Series||Group Mounted Sub-Miniature Poppet – 1/8″
Direct acting, normally closed solenoid valves. Available either AC or DC operated in brass or stainless steel bodies. Small poppet valve well suited for a wide variety of Air, Water, Lt. Oil Applications.